Product Picture
Application Picture
Application Picture
Application Picture
1   1

fischer bolt anchor FBN II 6/10 electro zinc plated

The cost-efficient fixing for flexible use in non-cracked concrete.

Art.-No. 505527
Top Features
  • Component tolerances are balanced out with the long thread. In addition, FBN II is also suitable for stand-off installations. This increases flexibility.
  • Simple assembly due to few taps and minimal slippage.
  • The drive-in pin protects the thread from damage. This saves time during installation and removal.

Product Description

The fischer bolt anchor FBN II is a steel anchor for cost-effective fixings in non-cracked concrete. Due to the long thread, the fischer bolt anchor FBN II can be used in a particularly flexible manner. The bolt anchor is also suitable for stand-off installation as well as pre-positioned and in push-through installation. The zinc-plated steel version of the bolt anchor is suitable for fixing railings, cable trays, and consoles in internal areas.
Advantages
  • The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required.
  • The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility.
  • Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation.
  • The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment.

Application and Permission

Applications
  • Steel constructions
  • Guard rails
  • Consoles
  • Ladders
  • Machines
  • Gates
  • Façades
Building materials
Approved for:
  • Concrete C20/25 to C50/60, non-cracked
Also suitable for:
  • Concrete C12/15
  • Natural stone with dense structure
You can find detailed information on building materials in the registration document.

Permission

  • ETA-07/0211
  • DoP 0192
  • DoP No. 0015
For Details see corresponding Documents

Assembly Instruction

Functionality
  • The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions.
  • Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut).
  • When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall.
  • The head embossing offers a simple control of the anchoring.
  • In the case of series installation, we recommend using the FABS bolt anchor setting tool.
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture

Technical Data

Technical Data

ETA-approval
Drill diameter 6 [mm]
Min. drill hole depth for through fixings 50 [mm]
Anchor length 55 [mm]
Max. usable length hef,max./hef,min. 10 / - [mm]
Thread M6 x 17 [mm]
Width across nut 10 [mm]
Packaging Folding box
Amount 100 [pcs.]
GTIN (EAN-Code) 4048962070248
Legend   =  Permission available

Documents for Downloading

Additional Documents

Approvals

Title Type Created Valid Till
ETA - European Technical Assessment (PDF, 2 MB) European Technical Assessment for fischer Bolt Anchor FBN II, FBN II A4 ETA-07/0211 19/5/2016
DOP - Declaration of Performance (PDF, 1 MB) DoP 0192 27/7/2020
DOP - Declaration of Performance (PDF, 1 MB) Declaration of Performance fischer Bolt Anchor FBN II - FBN II A4,  according European Technical Assessment ETA-07/0211 DoP No. 0015 25/5/2016
sc93-delivery-2