Faster bite due to unique PowerFast thread. This extends up to the screw tip.
Precise, splinter-proof surface finish without the screw twisting off, even with fastenings close to the edge.
High safety due to ETA approval.
Saves power and battery capacity. Shank ribs reduce the drive-in resistance.
Opis izdelka
Chipboard screws with countersunk head, PZ cross drive, and full thread
Advantages
The unique PowerFast thread reaches into the screw tip and ensures a fast bite. This makes your work noticeably easier with all wood materials.
The shank ribs (for screws with partial thread from 50 mm in length and up) substantially reduce drive-in resistance and thus enable greater power and battery conservation in your work.
The optimised head geometry enables an exact and splinter-free surface finish without the screw twisting off, even with connections close to the edge.
The underhead milled ribbing ensures an attractive surface finish.
The high-performance easy-glide coating reduces friction and accelerates the screwing process.
The ETA approval guarantees the high safety standard and the premium quality of fischer PowerFast screws.
The fischer PowerFast FPF-SZ BUF is a bronzed screw with full thread and cross-slot recess. The countersunk head allows for surface flush installation in wood. The integrated thread, which runs throughout the entire screw length, ensures the optimum transfer of force. The screw is suitable for fixing load-bearing components in coated wood, hardwood, softwood, and timber connections.
Dovoljenje aplikaciji
Applications
General wood joints
Safety-relevant applications
Plankings
Door and metal fittings
Building materials
Glued-laminated timber
Cross-laminated timber
Laminated veneer plywood panels (e.g. Multiplex)
Hard woods (pre-drilled)
Chipboards and oriented strand boards (e.g. OSB panels)
Plywood
Solid wood panels
Soft woods
And many other wood materials
Podroben opis najdete v priloženem dokumentu
Dovoljenja
ETA-11/0027
DoP No. W0003
Report No. 201811-0081-2:2020
Navodila uporabe
Functionality
Full-thread screws are recommended for mounting thin parts and in less firm wood materials (e.g. soft woods).
Screws with countersunk head can be flush mounted with the wood.
