{"getCategoryById":{"CategoryName":"Zykon panel anchors FZP II T for thin façade panels","TextList":[{"Key":"BEZEICHNUNG","Value":"Zykon panel anchors FZP II T for thin façade panels","__typename":"CatalogTextItem"},{"Key":"KATFAMTEXTGEN","Value":"

Zykon panel anchors FZP II T for thin façade panels

","__typename":"CatalogTextItem"},{"Key":"KAT_POS","Value":"The undercut anchors for concealed fixing of thin façade panels like HPL, fibre cement and ceramics.","__typename":"CatalogTextItem"},{"Key":"DOKBSTMARKDESCR","Value":"The undercut anchor for a concealed fixing of thin façade panels, such as ceramic and porcelain stoneware, HPL, fibre cement and solid surface. Suitable in combination with clasp systems or with other attachments.","__typename":"CatalogTextItem"},{"Key":"KAT_ANWENDUNG_GEN","Value":"

Applications

For concealed fixing of lighter / thiner panels on ventilated façades.

exterior façades
interior façades
reveal panels

","__typename":"CatalogTextItem"},{"Key":"KAT_BAUSTOFF_GEN","Value":"

Building materials

Ceramics
Porcelain stoneware
Fiber cement
HPL panels
Solid surface panels
Thin panel materials (≥ 8 mm)

","__typename":"CatalogTextItem"},{"Key":"EIGENSCHAFTENGEN","Value":"

Properties

Cone bolt: Stainless steel
Expansion ring: Stainless steel
Sleeve: Polyamid

","__typename":"CatalogTextItem"},{"Key":"KAT_VORTEILNUTZEN","Value":"

Advantages

The short geometry of the anchor allows it to be used in thin panels starting from 8 mm thickness.
The fixing is not externally visible, creating a visually appealing façade surface.
The matching shape of the undercut anchor creates a inter-locking and stress-free fixing in the conical undercuted drill hole.
Setting the anchor using undercut technology allows the user to select the best structural position in the façade panel. This significantly reduces the bending moment of the panel.
The anchor allows higher failure loads compared to common systems.
This anchor provides much better holding forces than commonly available systems which allows for the use of large format panels.

","__typename":"CatalogTextItem"},{"Key":"KAT_FUNKTION","Value":"

Functionality

drilling: first cylindrical, then conical - to create the undercut.
Inserting the undercut anchor in the cylindrical-conical undercut hole
Expanding the undercut anchor by \"pressing down\" the washer using the setting tools
Stress-free and geometrical inter-locking fixing

","__typename":"CatalogTextItem"}],"CategoryPath":["1002921377","1002921379"],"__typename":"CatalogCategoryData"}}