The undercut anchor for thin façade panels, such as HPL and fibre cement.

Zykon panel anchors FZP II T PA

The undercut anchor for a concealed fixing of thin façade panels such as HPL, fibre cement and mineral EQUITONE fibre cement panels. Use in conjunction with clasp systems or with other attachments.

Variantes do produto

Download of image data

Variantes do produto

Aprovações / Relatórios de testes

3 Variante (s) do produto

Min. panel thickness

Embedment depth

Total length

Installed anchor length

Remaining thread length

Thread

Legenda = Autorização disponível— = Permissão não disponível

Visualizada 3 de 3 variante (s)

Advantages

The short geometry of the anchor allows it to be used in thin panels starting from 8 mm thickness.
The fixing is not externally visible, creating a visually appealing façade surface.
The matching shape of the undercut anchor creates a inter-locking and stress-free fixing in the conical undercuted drill hole.
Setting the anchor using undercut technology allows the user to select the best structural position in the façade panel. This significantly reduces the bending moment of the panel.
The anchor allows higher failure loads compared to common systems.
This anchor provides much better holding forces than commonly available systems which allows for the use of large format panels.

Functionality

Dry drilling in ceramic.
The drill hole is drilled with an absolute anchoring depth.
Flush installation of the anchor, the spacer washer will be in full contact with the surface of the material.
Drilling: first cylindrical, then conical - to create the undercut.
Inserting the undercut anchor in the cylindrical-conical undercut hole.
Expanding the undercut anchor by "pressing down" the washer using the setting tools.
Stress-free and geometrical inter-locking fixing.

Mounting Strip 1 Picture

1 / 4

ETA-approval
Min. panel thickness	8 mm
Embedment depth ( h₁ )	6 mm
Total length ( l )	18,5 mm
Installed anchor length ( a )	8,5 mm
Remaining thread length ( b )	10 mm
Thread ( M )	M6
Cylindrical diameter ( d₀ )	11 mm
Undercutdiameter ( d₁ )	13,5 mm
Colour washer	red
Seismic-Approval	C1 / C2
System	—
Amount	250 pcs
GTIN (EAN-Code)	4048962168471

ETA-approval
Min. panel thickness	10 mm
Embedment depth ( h₁ )	8 mm
Total length ( l )	22,5 mm
Installed anchor length ( a )	10,5 mm
Remaining thread length ( b )	12 mm
Thread ( M )	M6
Cylindrical diameter ( d₀ )	11 mm
Undercutdiameter ( d₁ )	13,5 mm
Colour washer	yellow
Seismic-Approval	C1 / C2
System	—
Amount	250 pcs
GTIN (EAN-Code)	4048962168495

ETA-approval
Min. panel thickness	12 mm
Embedment depth ( h₁ )	10 mm
Total length ( l )	21,5 mm
Installed anchor length ( a )	12,5 mm
Remaining thread length ( b )	9 mm
Thread ( M )	M6
Cylindrical diameter ( d₀ )	11 mm
Undercutdiameter ( d₁ )	13,5 mm
Colour washer	green
Seismic-Approval	C1 / C2
System	—
Amount	250 pcs
GTIN (EAN-Code)	4048962168518

Zykon panel anchors FZP II T PA

Variantes do produto

As vantagens / Descrição do produto

Aplicação e aprovação

Instruções de montagem

Documentos para download