Product group image
1   1

Hammerset anchor EA N-D / EA II-D

The hammerset anchor for the anchoring of diamond saws and drills

The fischer hammerset anchor EA II M 12 D is an internal threaded anchor made from zinc-plated steel. It is ideally suited to the anchoring of diamond drills and saws. The anchor sleeve is reinforced so that it can bear the necessary loads. The hammerset anchor is mounted with the hammer flush to the base material. With the setting tool EHS Plus, the sleeve is expanded and braced against the drill hole wall through the driving in of the internal pin. No torque should be applied to the screw to enable correct expansion.

Product Description

Advantages
  • The embossed rim prevents the anchor sleeve from slipping, thus ensuring a trouble-free hammerset installation.
  • The metric internal thread means that it is possible to use standard screws or threaded rods for the ideal adaptation to suit the intended use.
  • The EMS machine setting tool allows for effortless installation, particularly in the case of series installations.
  • The embossing that is applied when expanding with the EHS Plus setting tool offers a simple control of the anchoring and provides increased safety.
  • Fixing point at hef 25 mm prevents anchor of falling out of the drill hole before being expanded.
  • The black fixing point prevents the anchor from falling out of the drill hole during overhead installation.

Available Product Variants

Application and Permission

Applications
  • Pipelines and ventilation ducts
  • Sprinkler systems
  • Cable conduits and wires
  • Gratings
  • Steel constructions
  • Machines
  • Consoles
  • Shuttering props
  • Diamond and core drilling devices
Building materials
Approved for:
  • Concrete C20/25 to C50/60, cracked, for the multiple fixings of non-load-bearing systems
  • Concrete C20/25 to C50/60, non-cracked
Also suitable for:
  • Concrete C12/15
  • Natural stone with dense structure
You can find detailed information on building materials in the registration document.

Permission

  • ETA-07/0135
  • ETA-07/0142
  • DoP No. 0003
  • DoP No. 0044
  • DoP No. 0069
  • DoP No. 0756-CPD-0294
  • DoP No. 0756-CPD-0332
For Details see corresponding Documents

Assembly Instruction

Functioning
  • The EA II is suitable for pre-positioned installation.
  • Position the hammerset anchor in the drill hole and drive in flush to the surface of the anchor base using the hammer.
  • The sleeve is then expanded by driving in the internal bolt with the EHS Plus setting tool (alternative: EMS machine setting tool), and expanded against the drill hole wall.
  • The setting tools must sit on the rim of the anchor to ensure correct expansion.
  • Use the special EA II M12 x 50 D / EA M 12 x 50 N D with thicker sleeve for fixing diamond and core drilling devices.

Documents for Downloading

Additional Documents

Approvals

Title Type Created Valid Till
ETA - European Technical Assessment (PDF, 2 MB) European Technical Assessment for fischer Hammerset anchor EA II ETA-07/0135 9/12/2016
ETA - European Technical Assessment (PDF, 2 MB) European Technical Assessment for fischer Hammerset anchor EA II ETA-07/0142 9/12/2016
DOP - Declaration of Performance (PDF, 1 MB) Declaration of Performance Hammerset anchor EA II, according European Technical Assessment ETA-07/0142 DoP No. 0003 14/11/2014
DOP - Declaration of Performance (PDF, 1 MB) DoP No. 0044 15/12/2016
DOP - Declaration of Performance (PDF, 1 MB) Declaration of Performance Hammerset anchor EA II, according European Technical Assessment ETA-07/0135 DoP No. 0069 15/12/2016
DOP - Declaration of Performance (PDF, 1 MB) Declaration of Performance fischer Hammerset anchor EA II DoP No. 0756-CPD-0294 12/6/2013
DOP - Declaration of Performance (PDF, 1 MB) Declaration of Performance fischer Hammerset anchor EA II DoP No. 0756-CPD-0332 11/6/2013

System Components & Related Categories

fe80::1c61:2ad1:f52e:7ce5%5