fischer epoxy mortar FIS EM Plus

The powerful injection mortar for rebar connections and cracked concrete

Your advantages at a glance

  • The optimised formulation of the epoxy mortar FIS EM Plus leads to improved load values in cracked and non-cracked concrete.
  • The mortar can be used for rebar connections from diameter 8 to 40 mm.
  • With the threaded rod FIS A, the loads to be introduced can be designed variably by selecting the anchorage depth.
  • Temporary and detachable fixing points are possible with the internal threaded anchor RG M I.
  • FIS EM Plus is to be processed for use on site even at low temperatures down to 0 °C (outside of the evaluation even down to -5 °C).
  • The mortar is approved for diamond-drilled and water-filled drill holes as well as seismic applications in performance categories C1, C2 and thus offers safety under extreme conditions.


Product online catalogue


Compatible anchors and connectors

Your advantages of anchor rod FIS A

  • The anchor rod FIS A is approved for use with FIS EM Plus in sizes M8 – M30 made of galvanised or stainless steel A4.
  • Variable anchorage depths allow for optimum adaptation to the respective application and load requirements.

To anchor rod FIS A

Your advantages of shear connector FCC-H

  • The FCC-H is a reinforcement bar with flange head for connecting a concrete cover to the existing concrete structure.
  • The concrete-concrete shear connector FCC-H is approved for building renovation, e. g. the renovation of bridges, the increase of load capacity of ceilings or to reinforce

To shear connector FCC-H

Your advantages of rebar anchor FRA

  • The rebar anchor FRA is a concrete steel bar with metric connection thread made of stainless steel in sizes M12 – M24.
  • The connection thread enables the transmission of very high tensile loads.
  • The fischer FRA is approved for subsequently mortared overlap joints, connection reinforcements, and needlings.

To rebar anchor FRA

Your advantages of internal threaded anchor RG MI

  • The internal threaded anchor RG MI is available in sizes M8 – M20 made of galvanized or stainless steel A4.
  • In combination with metric screws or threaded rods, RG MI can be used to create removable fixings.

To internal threaded anchor RG MI


Rebar connections
Seismic applications
Water-filled drill holes