The economical solution in cracked concrete

Highbond anchor FHB II-A S Inject

Name: Highbond anchor FHB II-A S Inject
Brand: fischer

The Highbond anchor rod FHB II-AS Inject R is a system component of the fischer Highbond system FHB II Inject. The bonded anchor is ideal for standard fastenings in cracked concrete. With the FHB II AS Inject R for example guard rails and steel constructions are fixed outdoors. The conical anchor is set with the Highbond special mortar FIS HB.

Product variants

Download of image data

Product variants

Approvals / Test reports

9 Product variant (s)

Drill diameter

Drill hole depth

Anchorage depth

Thread

Width across nut

Amount

Legend = Permission Available— = Permission not Available

Viewed 9 of 9 variant (s)

Advantages

The Highbond system FHB II Inject achieves high load values in cracked concrete.
The combination of injection mortar FIS HB and anchor rod FHB II-AS Inject R (short version) is ideally suited for serial installation outdoors.
The low drill hole depth minimizes the drilling effort, which saves time and ensures economical installation.
When using hollow drills with extraction, no drill hole cleaning is required.

Functionality

The FHB II-AS Inject is a bonded anchor with torque-controlled expansion for pre-positioned and push-trough installation.
The anchor rod is set with the Highbond special motor FIS HB and is fully bonded in the drill hole.
When tightening the hexagon nut, the anchor rod cones are pulled in the motar shell, which expands against the drill hole wall.

Mounting Strip 1 Picture

1 / 9

Mounting Strip 2 Picture

1 / 9

ETA Certification Document

pdf, ETA-16/0637

European Technical Assessment for fischer Highbond-Anchor FHB II Inject - Torque controlled bonded anchor for use in concrete

Created on 14/12/2017

DOP - Declaration of Performance

pdf, DoP No. 0281

Declaration of Performance for fischer Highbond-Anchor FHB II Inject (Bonded expansion fastener for use in concrete)

Created on 19/01/2021

ETA Certification Document

pdf, ETA-21/0948

European Technical Assessment for fischer Highbond-Anchor FHB II for diamond drilling / extended working life

Created on 09/09/2022

DOP - Declaration of Performance

pdf, DoP No. 0327

Declaration of Performance for fischer Highbond-Anchor FHB II for diamond drilling / extended working life (Bonded expansion fastener for use in concrete)

Created on 16/09/2022

Test report (fire protection)

pdf, (2103/12/12) - CM

lnjection systems FHB / FHB dyn / FDA

Valid from 15/07/2021
to 15/07/2026

Test report (fire protection)

pdf, GS 3.2/16-352-1

fischer Highbond anchors FHB II and FHB 11 lnject

Valid from 07/02/2017
to 06/02/2027

Load Table

pdf,

Highbond-Anchor FHB II Inject - Permissible loads of a single anchor in normal concrete of strength class C20/25.

System components

ETA-approval
Drill diameter ( d₀ )	10 mm
Drill hole depth ( h₀ )	66 mm
Anchorage depth ( h_ef )	60 mm
Thread ( M )	M10
Width across nut	17 mm
Amount	10 pcs.
GTIN (EAN-Code)	4048962272925

ETA-approval
Drill diameter ( d₀ )	10 mm
Drill hole depth ( h₀ )	66 mm
Anchorage depth ( h_ef )	60 mm
Thread ( M )	M10
Width across nut	17 mm
Amount	10 pcs.
GTIN (EAN-Code)	4048962272956

ETA-approval
Drill diameter ( d₀ )	10 mm
Drill hole depth ( h₀ )	66 mm
Anchorage depth ( h_ef )	60 mm
Thread ( M )	M10
Width across nut	17 mm
Amount	10 pcs.
GTIN (EAN-Code)	4048962272932

ETA-approval
Drill diameter ( d₀ )	10 mm
Drill hole depth ( h₀ )	66 mm
Anchorage depth ( h_ef )	60 mm
Thread ( M )	M10
Width across nut	17 mm
Amount	10 pcs.
GTIN (EAN-Code)	4048962273069

ETA-approval
Drill diameter ( d₀ )	10 mm
Drill hole depth ( h₀ )	66 mm
Anchorage depth ( h_ef )	60 mm
Thread ( M )	M10
Width across nut	17 mm
Amount	10 pcs.
GTIN (EAN-Code)	4048962272949

Highbond anchor FHB II-A S Inject

Product variants

The advantages / Product description

Application and approval

Assembly instruction

Documents for download

ETA-approval
Drill diameter ( d₀ )	12 mm
Drill hole depth ( h₀ )	81 mm
Anchorage depth ( h_ef )	75 mm
Thread ( M )	M12
Width across nut	19 mm
Amount	10 pcs.
GTIN (EAN-Code)	4048962273076

ETA-approval
Drill diameter ( d₀ )	16 mm
Drill hole depth ( h₀ )	101 mm
Anchorage depth ( h_ef )	95 mm
Thread ( M )	M16
Width across nut	24 mm
Amount	10 pcs.
GTIN (EAN-Code)	4048962273007